Monday 19 February 2018

Top 5 hidden features which will increase the safety of your Swift/ Dzire....

Top 5 features which will increase the safety of your Swift/ Dzire/ Ertiga/ Ritz/ Estillo.....

Boosting the security 

They below steps may work for other Maruti Suzuki vehicles also which comes with the ALARM button. These are the basic ways which can be done for almost all vehicle. Top end vehicles like Swift ZDI/ZXI there are other simpler ways. 


Have you ever wondered what is the use of ALARM button, even if you press it nothing happens(it doesn't seems like a button at all).
So, here are some amazing hidden features of ALARM button.

1 | 5

Programming Shock Sensor

Shock sensor is a very important feature to boost up the security of your vehicle. This feature will help your vehicle from any major impact. If anybody tries to intrude into your vehicle or try to hit the vehicle the alarm will trigger ON. There are two stages of alarm mode, first acting as warning to the intruder and second, full blast mode. These are turned OFF by default, so you need to switch ON this feature.
  1. Open the Driving Door(Obviously you should open the driver door to get in the car).
  2. With the vehicle key turn the ignition ON and then turn it OFF.(no need of switching ON the engine)
  3. Press and release this security (Alarm) button four times.

    4. Then press and hold the security switch till the four-chirp sounds.
    5. The four-chirp sound confirms the entry into Shock sensor ON/OFF programming mode.
    6. Press the lock key button (in the Key) while holding security button. A single chirp sound                    confirms the mode changed to shock sensor ON.
    7. While the two-Siren mode confirms the mode changed to shock sensor OFF.
    8. Release the security switch.(Above steps should be done while holding the alarm button.
    9. Turn the ignition ON.

2 | 5

Shock Sensor Sensitivity Adjustment via Key

Full blast adjustment (it means the long siren for eg. when you open the door when the vehicle is Armed/ Locked) 

There are 16 levels of adjustments for the Shock Sensor. These levels can be done with the help of vehicle key.

     1. Press Unlock button on Key to Unlock (Disarm the system)

     2. Press Lock button (this step should be done within 2 seconds of key Unlock) on the key (Arm             the system).

     3. Press both the Lock and Unlock simultaneously for at least 3 seconds. Siren will give Long               chirp to confirm entry into sensitivity adjustment mode.
         a.  Press Lock button to adjust the sensitivity one step lower. Siren will give one chirp every                    time lock button is pressed till level 1 where it will give a long chirp. At level 1 full blast                      mode will be switched OFF.
         b.  Similarly pressing Unlock button will increase the sock sensor sensitivity one step higher                    and every time the siren will give single chirp. At level 16 the siren will give long chirp.
    

3 | 5

Setting up PIN for your vehicle.

Yeah! you heard it correct. You can set the PIN for your vehicle. This can be useful when the transmitter is not working properly. But it's not that kind of PIN that you are thinking (like typing numbers). So, how to set it up.
For setting up PIN also you need the same ALARM button.


    1. Disarm( unlock) the system/car.
    2. Open the driver door.
    3. Turn the ignition ON then OFF(no need of switching ON the engine).
    4. Withing 5 seconds press and release the Alarm/Valet button 5 times. A short chirp followed by the long chirp confirms the entry into PIN mode.
    5. Now press the Lock button on key, after the single chirp enter the first digit(within 1-9) by pressing the Alarm button. For e.g. to enter 4 press and release the alarm button 4 times.
    6. Then press the Lock button on Key, after two chirps enter the second digit similar way we did in step 5.
    7. Press Lock button on Key and after three chirps enter the third digit.
    8. Press Lock Button on Key and after four chirps enter fourth digit.

This is how to set up 4 digit PIN for your vehicle.

4 | 5

Setting up Anti-Theft feature in Music System


   Anti-theft feature is basically for discouraging thefts, as this features disable the audio system when it's installed in the other vehicles. 
The audio system will become operable in other vehicle if only the PIN is entered.
The following steps will help you to set this function.

    1. Press the VOL push PWR knob to switch of the Music system.


    2. Hold down the buttons numbered [1] and [6] simultaneously.

    3. Then press the VOLpushPWR to switch ON the audio system. [SECURITY] will be displayed.
   
    4. Press the [UP] button and the button numbered [1] simultaneously. 
 
    5. The above step will direct to the PIN entry section.

    6. Enter 4-digit number to be registered as PIN using the buttons numbered from [1] to [4].
        After entering the digits it will be displayed like this.


    7. Press and hold the TUNE FOLDER PUSH knob for 1 second or longer.


    8. After pressing the TUNE FOLDER PUSH button for 1 second a [COMPLETE] message will be          displayed, which means the anti-theft feature is programmed. As shown below.


5 | 5

Adjusting Brightness of all Interior Lighting.

You can adjust the brightness of all lights that are present inside your vehicle. This includes the infotainment cluster including the AC button lights, the Power window lights (where auto is written) etc.
Below are the following steps to adjust the brightness of the Light.

    1. Turn ON the battery of the vehicle by turning the Key.
    2. Then turn ON the parking lights/headlights.


    3. Rotate the right knob of the speedometer as shown.

    4. This will display some boxes instead of the main Odometer.
      (a) If you rotate the knob clockwise the Brightness will increase.
      (b) The counter clockwise rotation of the knob will decrease the intensity.


Click here check whether is it possible is fill the vehicles tank with Petrol instead of Diesel or vice-versa.

Click here to know what all things are needed before buying a second hand car
Thank You

5 comments:

  1. In the section " programming the shock sensor" what is the security switch and where is it ?

    ReplyDelete
    Replies
    1. Which model is it
      It works for ertiga 2014 zxi+

      Delete
  2. It is wise to get in the car and get accustomed to all the buttons and its functions before taking the car out. Different cars have different options, so you better get used to the options before starting to enjoy it. Exotic car for rent near me

    ReplyDelete
  3. Suzuki desire 2021 security setting has only S1 option and do not have S2 - S4 options

    ReplyDelete
  4. A smart keyless entry system that adds convenience and enhances security. 9Qpes Discount On Cyberghost VPN Advanced voice recognition for hands-free control of your car's features.

    ReplyDelete

Top features of Jeep Compass which makes it unique.

Jeep launched this big beast which they named it Compass on 2017. The biggest advantages of this car is that there is not any direc...